Jeep 4xe Maintenance Tips

The first service to keep in mind for your Wrangler or Grand Cherokee 4xe is routine oil changes. While Jeep 4xe models are electric vehicles, they are plug-in hybrid vehicles, meaning that they still have an internal combustion engine. And with an internal combustion engine comes engine oil that needs to be drained and replaced every 7,500 miles. With each oil change, you should also have a tire rotation performed. This will help prevent uneven and premature wear on the tires to extend the life of the tires and save you money in the long run. While your brakes should be inspected regularly, Jeep 4xe models use regenerative braking. This reverses the electric motors, slowing the vehicle down without causing the same wear and tear on the brake pads and rotors as a traditional vehicle. This extends the life of your brakes and their critical components.

In addition to the primary maintenance services, including oil changes and tire rotations, there are others that should be taken care of. At each oil change, the technicians in the Marburger CDJR service center will inspect your fluid levels, braking system, suspension system, exhaust system, and other systems that pertain to your vehicle's safety and emissions to ensure their quality. If any show signs of needing replacement, we will inform you. Approximately every 15,000 miles, you should have your air filters checked and replaced if necessary. The first air filter cleans the air going into the engine, removing dirt and road debris to prevent damage to the engine's internals. The second is your cabin air filter, which filters contaminants like dirt, pollen, and other particles from the air you breathe inside your vehicle. If you use your Jeep 4xe for off-roading or frequently drive on dirt roads, you should have these filters checked more frequently. 

Electric vehicles have larger batteries than traditional vehicles. Understanding your Jeep 4xe's battery is essential to maintaining it. Giving your battery the proper care is essential to keeping it performing its best and providing you with the longest driving range. First and foremost, it's important to understand that, while much larger, an EV battery is similar to the battery inside your smartphone or tablet. Like your smartphone, overcharging can be detrimental, and consistently charging it to full capacity gradually wears it down. To prevent cell damage, seasoned EV owners recommend waiting until the battery reaches around 15% charge before plugging it in. Once plugged in, aim for a charge level between 80% and 85%, avoiding a full 100%. This approach prevents overcharging while still providing sufficient range for daily commuting. If planning an extended trip beyond your usual commute, occasional full charging to 100% is acceptable. Furthermore, to maximize your battery's range, minimize your vehicle's weight as much as possible. Just like conventional gas-powered cars, a heavier load demands more power to propel the vehicle. Therefore, it's prudent to carry only essentials when driving.

Owning a Jeep 4xe is a great choice for drivers looking to make the switch to an electric vehicle. Now that you're confident in the maintenance of a Jeep 4xe, it's time to start your search for the 4xe model that suits you best. Here at Marburger Chrysler Dodge Jeep Ram, we're proud to offer drivers in the vicinity of Charlotte, North Carolina, a wide range of Jeep 4xe models. Shop online to find the right one for you. If you'd like to experience the electrified power of a Jeep 4xe, fill out the form below to schedule a test drive. Or, while you're here on our website you can use our online service scheduler for your Jeep 4xe.